Retic Controller Reprogramming Guide

Home / Uncategorized / Retic Controller Reprogramming Guide

Sometimes the best way to start reprogramming a controller is to do a factory reset.

HOW TO RESET A HUNTER XC or EC CONTROLLER (OLD STYLE)!!

To do so start with:

  1.      Press and Hold the (PRG) Button.
  2.      While holding the (PRG) button, Press and hold the reset button for 3 seconds, release the RESET button while still holding the (PRG) Button.
  3.        Hold the (PRG) Button for 5-10 seconds until the time is displayed. The display should be showing 12.00am)

HOW TO RESET A HUNTER X-CORE CONTROLLER (NEW STYLE)!!

To do so start with:

  1.        Press and hold down the Minus (-) Right Arrow (->) and Program (PRG) Button.
  2.       Press and release the RESET button on the right side of the controller.
  3.      Wait 2 seconds and release the Minus (-) Right Arrow (->) and Program (PRG) Button.
  4.      The display should now be showing 12:00am. All the memory has been cleared and   the controller can now be reprogrammed.